Made enough progress with the frame to install the upper A-arms and dummy shocks (Half travel length). Next steps: Finish the frame with som...

Finally got to that stage of frame fabrication where I could prop it up and fit check it. It's a fun moment to shoot and share - that pi...

Well, this was a fun surprise - I had no part in this video's production:  Lots of fun comments and the usual stupid  comments. This is ...

Hanging over my desk, for many years now, was my first 2WS/2WD experimental electric recumbent bike. While leaning back in my chair and star...

 The 2WS/2WD system for the next racer is assembled and on the bench! This is the first bike project of mine where the frame wasn't buil...

 When the decision was made to build the last racer, the first 3 thoughts went through my head: This is going to be a lot of work. This is g...

The racer has spent almost 3 years stuck in the workshop, welcoming me every time I walked in the door. While it still is an unusually amusi...

One of the big challenges for the next racer was building an engine with my own crankcase. The built and fully developed engine was expected...

According to the social media moto-gossipers, I'm doing everything wrong! They don't know what I'm doing, so clearly I must not ...

In addition to design work and parts acquisition, the last two years were spent getting the new shop set up and tooled up. The shop is ready...